Roller Banners

PVC Banner Printing

Our roll to roll wide format presses specialise in printing PVC Banners and backdrops.  We print one off banners as well as larger projects including building wraps.  We pride ourselves on producing excellent quality wide format printing, and our banners are no exception, all at a low price too! Here's what our PVC banner printing offers you:

• Durable 510gsm scrim banner substrate as standard (others available)
• All banners are suitable for both internal and outdoor use
• High quality banner printing
• Banners come supplied with eyelets and reinforced edges
• We can print any sized banner
• PVC, Mesh and Fabric banners available
• Banner design service

We can produce any size banner, and we can advise on sizes as well as fitting and installation on larger banners.

Durable PVC Banners

Our range of PVC banner substrates enables us to select a PVC material most suitable to do the job for you.  From building wraps to small marketing banners, we are able to advise on the most suitable for your project, no matter how big or small. On most occasions our standard PVC banner substrate will suffice.  It has a strong scrim within the PVC to add strength and ensures durability.  However, on larger banners such as building wraps we will advise on the most suitable PVC to suit your project.  One such substrate might be Mesh banner.

Mesh Banners

We are also able to print and manufacture Mesh Banners.  Mesh banners allow the air to flow through them and can alleviate the stress on the supporting structure.  In some cases, mesh banners can be more durable, particularly in open places prone to windy conditions. In most cases our standard scrim PVC banner will suffice, please don't hesitate to get in touch to discuss in more detail.

PVC Banner Design

We can design, print and deliver your PVC banners within short deadlines.  Our studio will discuss your requirements to identify the headline message, together with the graphics and logo's to create your masterpiece!

Here to help

No matter what size banners you require, we're here to help you get from design to delivery efficiently.  If you have a project that may require help or advice, please call 01270 625207 for an immediate response.  Alternatively, leave a message for us below and we'll get back to you as soon as possible.

Banner Installation

If you need help installing your banners, our installation team are on hand to help.  We're involved in projects across the UK, whether it's a multi-site installation, building wraps or banners installed at height.  Our installation team are certified to work safely at height, and all have appropriate CSCS cards where working on site is necessary.  See our installation team page for more details.    

The Twist Exhibition Stand versus the traditional Pop-up Stand

The advantages of the Twist Stand.

We’re very often asked what the pro’s and cons are of the Twist Exhibition Stand over the more commonly used 3x3 pop-up.  Both are relatively quick to install and break-down, and perform the task well of displaying graphics and information at any exhibition or event.  And, perhaps more to the point, they are both designed for easy transit.  So which do you choose?

Flexible and Versatile

The biggest advantage of the Twist Stand is that it offers a flexible and versatile modular aspect.  The Twist can be extended in height up to 2.7 metres (standard size being 2 metres) but more impressively, it can extend in width quickly and easily.  Whilst the traditional pop-up stand has a rigid size, the Twist Stand has the ability to be used as a simple 3 panel kit or as a complete exhibition display. Its flexibility comes from a patented Flexi-panel which enables the stand to ‘twist’ around corners of almost every angle.  This may form a large part of your decision-making as you will have hardware to fit any future exhibition space.  And, as long as design takes into account the possible reconfigurations of the stand, your graphics can be used to suit displays of varying shapes and sizes.

Does it come with lights, transit case and lectern?

Yes. Both the pop up stand and the 3 panel Twist Stand are usually supplied with a transit case.  Spotlights and a lectern top and graphic wrap are part of the bundle offer.  The lectern top and graphic wrap will convert the transit case for both into decent lecterns.  The pop ups lectern/transit case being twice the width of that of the Twist Stand, may add more weight on the stand but is perhaps not as easy to transit.  The Twist Stand's transit cases are designed to click-fit together to form a larger lectern, and we can also produce a lectern top to fit. The Twist also incorporates specifically built spotlights.  The posts have in-built plugs and a neat cable-tidy set within the length of the post to take the wires down to the foot of the stand.  The Twists transit case also has a foam infill, designed to house each post, light and graphic to prevent it rattling around during transit.

Price

The Twist is most commonly sold as a 3 panel kit to match the 3x3 pop-up in size, and the Pop-up usually works out a little cheaper in price.  However, the constraints on the fixed size of the pop-up stand might not give you the best ROI in the long term, and considerations of future use needs to be considered.  The pop-up can also be bought as frame and graphics only which may reduce cost further, but may leave you stuck when it comes to moving the stand to and from an exhibition.

Installation of the Twist Stand

Installing the Twist stand is perhaps not as intuitive as installing the pop up. There's no frame behind it like there is on the pop-up stands and instead relies on mag strips on the back of the graphic to pull your design together.  However this does have the advantage of making it easier to line up your graphics once installed. Timewise, we think that once you've had a bit of practice, you should be taking about 10-15 minutes to install both the pop up and  the Twist Stand, but the Twist is a bit quicker to break down, and the structured transit case ensures you store the graphics correctly, ready for the next time you need it. Give the team a call on 01270 625207 to discuss the best option for you in more detail or use the form below.  We can supply video and graphics to support you, or we can demonstrate the stand so you can see for yourself how easy they are to install.  

Extra Wide Roller Banners Made in Cheshire

Extra Wide roller banners can be useful in a number of different situations.  Our Cheshire based manufacturing unit offers a complete range of wide roller banners up to 3.2 metres in width.

• Logo Boards
• Photography backdrops and walls
• Exhibition Stands
• Reception spaces
• Partition walls

Advantages of Wide Roller Banners

When you want to cover more space with a flush graphic, you'll get more value for money with a wide roller banners more than anything else.  The cost of roller banner hardware means the price stays competitive and gives the end user more graphic for the cost, compared to most graphic walls. They are also quick and easy to install as the video above shows.  Whilst with a bit of practise it can be a one man job, its always better to have a helping hand when lifting something at this width. Also, we are able to print extra wide roller banners in one piece, giving a completely flush single graphic without the need to match up sections. The Panorama wide pull up banner is the largest single action roller banner on the market.  The mechanisms have a quality build, and the high quality printed graphics are supported by three poles at the reverse.

Logo Boards and Photography backdrops

They are often used as quick and simple to install logo boards, Mainly used in stadia for marketing back walls for TV and photography.  Also as logo boards at events and presentations where permanent boards are not in place, or too difficult to erect in time. Give the team a call to discuss in more detail, or leave a message below and we'll get back to you as soon as possible.  If its a quick turnaround you need, please give our sign and display manager, Jamie Brelsford a call for an immediate response.

Our fabric display stands are available in a range of sizes in curved or straight backdrops.  They create a seamless and high quality graphic to your display and are perfect for quick install and break down.

Fabric Display Stands

The use of fabric graphics in exhibition and display projects has increased with digital printing and dye-sub presses becoming ever more popular. The advantages include the reduced weight that fabric offers.  Making it easy to move around and easy to store whilst in transit.  Furthermore, the lightweight fabrics make the stand easy to install by placing the fabric over the frame and zipping up to stretch the graphic.

One Continuous Graphic

Another advantage is the one-piece graphic.  There is no need for multiple panels, eliminating the join lines associated with Pop-Up stands. It is possible to join stands together using the connection kit.  This enables you to create larger and graphic walls and backdrops and allows you to edit the size accordingly.

Single or double sided

We can print onto both sides of the fabric cover which gives you the option on having your stand as a single or double sided fabric display stand. Also ideal as a permanent office display offering a two sided wall, backdrop or display wall.  The fabric display stands will give you years of use and graphics can easily be replaced when the time comes to change message or brand. Give the team a call 01270 625207 or use the form below and leave us a message - we'll get back to you as soon as we can.