As well as producing both branded and non branded whiteboards, we can print and install floor-to-ceiling dry wipe walls. The walls can be ‘magnetic’ as well as being branded, making the wall completely bespoke to you.
Dry Wipe Walls – Magnet Receptive
Dry wipe and magnetic wall covering.
Sometimes, even the largest whiteboard just isn’t big enough. When you need an entire wall to be your “Ideas Wall” or your “Working Wall” we have the perfect solution. We can produce a full whiteboard wall, add graphics and detail and even make it magnet receptive. Not only that, our office fitting team install UK wide.
We print directly to ferrous substrates offering a relatively strong base to receive magnets. We can then laminate with dry wipe film to create a completely bespoke wall which can be written on with dry wipe marker pens and wiped easily. (We do have a solution to help clean off permanent marker!) In fact its the very same film we use for all our branded whiteboards.
Measuring For Installation
Installation of dry wipe walls
When measuring up the for the magnetic dry wipe wall, make sure you take a photograph and send it over to us. We can work around most things, so your wall doesn’t need to be completely square and can include light switches or any kind of ceiling ducts.
Its relatively simple but we’re here to make things easier. We can visit you free of charge to measure and check walls where required. Call Jamie Brelsford on 01270 625207 to discuss in more detail, or send measurements over to sales@jprint.co.uk
Full Office Branding Services
We also print bespoke wallpapers and wall coverings. More importantly we also manage each office branding project from start to finish. That includes visiting to measure and check that wall surfaces are suitable. We may also be able to offer suggestions and options when it comes to the kind of messages you are presenting in the office space. Working with design agencies across the UK, we give a professionally printed and managed installation service. Creating signage and branding solutions to both large and small projects, we manage each job from site survey to installation. See more office branding information here.
Related Information
Sign Making Services
Your project manager will ensure that your signage is installed safely. In most cases the project manager will be working alongside our experienced installation team . Safety compliance is of paramount importance to us and all our fitters have appropriate health and safety certification.
Sign Making & Installation
Sign Manufacturers Based in Cheshire
Johnsons have an experienced team creating signs for both external and internal use. We produce a complete range of signage options from built up and 3D letters to office wall graphics. Furthermore we offer advice, site surveys and installation, giving a comprehensive signage service from start to finish. We have a wide range of expertise including:- Company Branding
- Built-up Logo's and Letters
- Shop Signs
- Site Hoarding
- Directional Signs
- Office Signs
- Temporary Signage
- Festival & Events
- School Signs
- Correx, Foamex, Dibond Signs
- Illuminated Signage Solutions
- Self Adhesive Vinyl's
- Notice Boards
Start With A Free Site Survey
Our free site survey allows us to assess all the possibilities available to create your signage. This is usually undertaken by your Installation Manager who will look after your project from start to finish. The processes include; sign making, print production and installation. At this stage we may also give you a scrapbook of ideas, suggestions and solutions that can be successfully converted into practical and creative sign solutions. Alternatively, if you already know exactly what you want, our survey will make sure its possible, ensuring a swift and safe installation. Give the team a call on 01270 625207 or leave a message in the form below, and we'll get a quote over to you as soon as possible.Signage Design Ideas
You may already have a good idea of how you want your sign to look. If not, we're here to help. We can show you examples of past work and offer ideas on the best way to display your signs. Also, if you need illuminated signage we can work out the best way this can be incorporated into the design using LED or spotlights.Installation of Signs
Your project manager will ensure that your signage is installed safely. In most cases the project manager will be working alongside our experienced installation team . Safety compliance is of paramount importance to us and all our fitters have appropriate health and safety certification.
Risk Assessment & Method Statements
Furthermore, some projects may need RAMS and we can supply these for you. Usually RAMS can be supplied after a site survey and will be published by your project manager who will look after your sign production and installation from start to finish. Similarly, other certification such as PASMA or CSCS cards will be supplied where required.Free Site Survey
If you would like to discuss your signs in more detail, please don't hesitate to call. We can help you find the right options and possibilities available at your site. We offer a free survey where we can assess all parts of installation, measurements and practical solutions. In the first instance, call Jamie Brelsford on 01270 625207 or leave a message in the form below and we'll get back to you as soon as possible.
Office Branding – Wallcoverings & Wall Vinyls
Your office branding project may be large or small, but the attention to its quality and detail will be prevalent throughout our production and installation processes.
Get in touch for a free site survey and consultation where you can discuss your ideas. Speak to project manager Jamie Brelsford on 01270 625207 or email sales@jprint.co.uk
Dry wipe and magnetic wall covering.[/caption]
We work with companies and organisations of all sizes, including some of the largest design agencies to create fantastic wall art, wallpapers, signage and accessories. This may start with an initial site survey to discuss ideas, measure-up and check all installation possibilities.
If you need ideas, we can show you examples of past jobs or we can create visuals to show you how your office could look. We can also show you samples of the different substrates available from window vinyl films, acrylics or printed fabrics.
When your artwork is ready for production, we'll ensure accurate colour matching and the highest possible quality print and production, ready for installation and fitting.
Installing dry wipe and magnetic walls[/caption]
If you need help with a small vinyl or the largest wallpaper graphics, our installation team have the experience to create professional office spaces. And where required, we will produce a risk assessment and method statement for the project, no matter how big or small the job is.
We'll work with you to ensure a swift and safe installation. If that means working when you're closed we will, anything to make it easier for you and your workplace.
All office branding needs care and attention during the installation and we pride ourselves in creating a professional service in a swift and safe manner.
Office Branding
Our experience in creating exceptional office branding enables you to create the office environment you want. We'll take care of everything from start to finish and make your ideas work from print through to installation and beyond.Your office branding project may be large or small, but the attention to its quality and detail will be prevalent throughout our production and installation processes.
Get in touch for a free site survey and consultation where you can discuss your ideas. Speak to project manager Jamie Brelsford on 01270 625207 or email sales@jprint.co.uk
Our Office Branding Services Include:
- Print and sampling
- Site Surveys
- Bespoke wallpapers
- Dry wipe and Magnetic wall coverings
- Office Wall Vinyls
- Printed Window graphics
- Floor Graphics
- Directional Signage
- Office accessories
- Comprehensive Installation Services
- Risk Assessment and Method Statements
From Design to Installation
[caption id="attachment_656" align="alignleft" width="300"] Dry wipe and magnetic wall covering.[/caption]
We work with companies and organisations of all sizes, including some of the largest design agencies to create fantastic wall art, wallpapers, signage and accessories. This may start with an initial site survey to discuss ideas, measure-up and check all installation possibilities.
If you need ideas, we can show you examples of past jobs or we can create visuals to show you how your office could look. We can also show you samples of the different substrates available from window vinyl films, acrylics or printed fabrics.
When your artwork is ready for production, we'll ensure accurate colour matching and the highest possible quality print and production, ready for installation and fitting.
Installation of Office Vinyls and Wallpaper
[caption id="attachment_660" align="alignleft" width="146"] Installing dry wipe and magnetic walls[/caption]
If you need help with a small vinyl or the largest wallpaper graphics, our installation team have the experience to create professional office spaces. And where required, we will produce a risk assessment and method statement for the project, no matter how big or small the job is.
We'll work with you to ensure a swift and safe installation. If that means working when you're closed we will, anything to make it easier for you and your workplace.
All office branding needs care and attention during the installation and we pride ourselves in creating a professional service in a swift and safe manner.
Colour Matching Large Format Print
Typical example of poor colour matching[/caption]
[caption id="attachment_571" align="alignleft" width="225"]
The difference between Pantone splits and our colour match[/caption]
The four page document folder was printed to Pantone 295c and then matt laminated. PVC banners which were part of the same project, then had to be printed CMYK using the Pantone guidelines for the CMYK splits. The differences between spot colours and the equivalent CMYK values were very obvious.
However after a small amount of time a spot colour match was achieved using the workflow spectrometer previously calibrated to all of our stocked substrates. The difference between the two colours is shown in the image on the right.
This allowed us to present accurately coloured PVC banners to our customer which were suitably matched to a product printed as a spot colour. Discussing this early in the process enabled us to match these colour critical products with each other quickly and efficiently.
Exact match achieved from paint daub[/caption]
When we were asked to match our printed signage to a daub of paint, we knew with confidence that we could match the colours.
We were asked to print signage on both Foamex and aluminium composite for a school. With the majority of the woodwork at the school painted in the dark green colour, and no RAL number to hand, we went about matching to a daub of paint supplied by the school. The results were excellent, with the press giving colour matches on two very different surfaces.
If you have print work which requires accurate colour matching, please get in touch to discuss in more detail. Call 01270 625207 or leave a message on the form below and we'll get back to you as quickly as possible.
Colour Matching Wide Format Print
How we match colours across different printing processes
Colour matching your wide format print to Litho print, digital print, Pantone colours, CMYK values or even paint is no longer a problem. Our investment in the AGFA workflow system gives us the ability to spot match your brand colours, paint or standard format printed items such as letterheads, brochures or business cards. We can even match colours that have been inaccurately printed in the past, to give you continuity. Because we use an AGFA workflow throughout our print sites, they "talk" to each other to ensure closest match printing whatever the press we're printing on.Spot colour matching between different presses
The spectrometer also takes into account how colour is represented on different substrates and materials. Whilst this has been a problem in the past, particularly when converting brand colours to wide format substrates, the AGFA solution has enabled us to match colour seamlessly between different presses and materials such as Foamex or PVC. Not only that, once your colours are approved, the colour data is saved and named, then applied to every kind of substrate you might possibly want to print to, ready for the next time your brand colour is required.Spot Colour Matching Case Studies
Case study 1 - Colour Matching Wide Format Print
This is a problem most highlighted when Pantone colours are used in litho printing, and then the converted CMYK values are applied to the wide format print process. Difficulties matching colours when printing both litho and wide format prints are used for the same project. This was exactly the problem we had with the two pieces we printed below. [caption id="attachment_568" align="alignleft" width="300"] Typical example of poor colour matching[/caption]
[caption id="attachment_571" align="alignleft" width="225"] The difference between Pantone splits and our colour match[/caption]
The four page document folder was printed to Pantone 295c and then matt laminated. PVC banners which were part of the same project, then had to be printed CMYK using the Pantone guidelines for the CMYK splits. The differences between spot colours and the equivalent CMYK values were very obvious.
However after a small amount of time a spot colour match was achieved using the workflow spectrometer previously calibrated to all of our stocked substrates. The difference between the two colours is shown in the image on the right.
This allowed us to present accurately coloured PVC banners to our customer which were suitably matched to a product printed as a spot colour. Discussing this early in the process enabled us to match these colour critical products with each other quickly and efficiently.
Case Study 2 - Colour Matching Paint
[caption id="attachment_573" align="alignleft" width="225"] Exact match achieved from paint daub[/caption]
When we were asked to match our printed signage to a daub of paint, we knew with confidence that we could match the colours.
We were asked to print signage on both Foamex and aluminium composite for a school. With the majority of the woodwork at the school painted in the dark green colour, and no RAL number to hand, we went about matching to a daub of paint supplied by the school. The results were excellent, with the press giving colour matches on two very different surfaces.
If you have print work which requires accurate colour matching, please get in touch to discuss in more detail. Call 01270 625207 or leave a message on the form below and we'll get back to you as quickly as possible.